Coaxial Cable Assembly
Microwave Test Cable
Coaxial RF Connector
Coaxial RF Adapter
Coaxial RF Termination
Coaxial RF Test Probe
Coaxial RF Attenuator
RF Switches
Rotary Joints
RF Circulators
Coaxial RF Power Dividers
RF Couplers
RF FiltersRF Switches
ZOMWAVE RF switches are precision microwave components built to route high-frequency signals through designated paths in advanced test systems, so you can reduce manual reconfiguration and keep multi-instrument setups moving with less interruption. The lineup includes ultra-fast PIN diode switches, rugged electromechanical relay switches, and special coaxial switch designs such as A/B relays and transfer switches, all aimed at improving throughput, repeatability, and signal integrity in dense test environments.
For teams looking for an RF high-power switch, the portfolio supports both 50 ohm and 75 ohm systems with SMA, BNC, and Type N interfaces, while switch designs range from SPDT and DPDT to SP3T through SP10T. The page also shows coverage from DC to 40 GHz, switching speeds of 100 to 250 nanoseconds depending on model, power handling from 0.5 W to 275 W, plus low VSWR, low insertion loss, high isolation, and redundant switching options that help you cut setup drift, shorten test time, and keep measurements consistent.
On the supply side, ZOMWAVE lists many RF switch items as shipping within five business days from an ISO 9001:2015 certified facility, backed by immediate application guidance, custom configurations, validated RF test data, and lifecycle support. That combination helps you reduce lead times, lower sourcing risk, simplify qualification, and keep complex RF projects moving with fewer delays and less rework.
SP6T Electromechanical Relay Latching Switch, Unterminated DC to 12.4 GHz, up to 170W, 24V, Positive Common, N Female Type
SKU:
P/N:SWS6T-NC12G24V-L3J2-01
The SWS6T-NC12G24V-L3J2-01 is a Single Pole Six Throw (SP6T) electromechanical relay switch that operates across a wide frequency range of DC to 12.4 GHz and can handle up to 170W of average power in a break before make condition. The design is rated for 1 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 0.5 dB insertion loss and isolation greater than 60 dB. This switch requires +24Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports N Type female connectors and 2*8P JTAG for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.
SP6T Electromechanical Relay Latching Switch, Unterminated DC to 8 GHz, up to 210W, 24V, Positive Common, N Female Type
SKU:
P/N:SWS6T-NC08G24V-L3J2-01
The SWS6T-NC08G24V-L3J2-01 is a Single Pole Six Throw (SP6T) electromechanical relay switch that operates across a wide frequency range of DC to 8 GHz and can handle up to 210W of average power in a break before make condition. The design is rated for 1 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 0.35 dB insertion loss and isolation greater than 70 dB. This switch requires +24Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports N Type female connectors and 2*8P JTAG for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.
SP6T Electromechanical Relay Latching Switch, Unterminated DC to 8 GHz, up to 210W, 12V, TTL(H), N Female Type
SKU:
P/N:SWS6T-NC08G12V-L3D5-01
The SWS6T-NC08G12V-L3D5-01 is a Single Pole Six Throw (SP6T) electromechanical relay switch that operates across a wide frequency range of DC to 8 GHz and can handle up to 210W of average power in a break before make condition. The design is rated for 1 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 0.35 dB insertion loss and isolation greater than 70 dB. This switch requires +12Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports N Type female connectors and D Sub 15 for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.
SP6T Electromechanical Relay Latching Switch, Unterminated DC to 3 GHz, up to 350W, 24V, Positive Common, N Female Type
SKU:
P/N:SWS6T-NC03G3V-L3J2-01
The SWS6T-NC03G3V-L3J2-01 is a Single Pole Six Throw (SP6T) electromechanical relay switch that operates across a wide frequency range of DC to 3 GHz and can handle up to 350W of average power in a break before make condition. The design is rated for 1 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 0.25 dB insertion loss and isolation greater than 80 dB. This switch requires +24Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports N Type female connectors and 2*8P JTAG for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.
SP6T Electromechanical Relay Latching Switch, Unterminated DC to 3 GHz, up to 350W, 12V, TTL(H), N Female Type
SKU:
P/N:SWS6T-NC03G12V-L3D5-01
The SWS6T-NC03G12V-L3D5-01 is a Single Pole Sixt Throw (SP6T ) electromechanical relay switch that operates across a wide frequency range of DC to 3 GHz and can handle up to 350W of average power in a break before make condition. The design is rated for 1 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 0.25 dB insertion loss and isolation greater than 80 dB. This switch requires +12Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports N Type female connectors and D-SUB 15P for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.
Absorptive SP16T PIN Diode Switch Operating From 0.4 Ghz to 12 Ghz Up to +30 dBm and SMA-Female
SKU:
P/N: PSWA-GT-MA0040120S-01
The PSWA-GT-MA0040120S-01 is a Single Pole Sixteen Throw (SP16T) PIN diode switch with an operating frequency range of 0.4 GHz to 12 GHz. The 50 ohm absorptive design supports TTL compatible driver circuitry for accurate logic control. Impressive typical performance includes 4.7 dB insertion loss, 95 dB isolation, and < 150 nsec switching speed. The switch requires a dual bias voltage of +5Vdc / -5Vdc and has maximum input power handling of up to +30 dBm. The rugged and compact package supports SMA female RF connectors and solder terminal pins for DC bias voltage and TTL control. The switch is designed for high reliability with a wide operational temperature range of -40°C to +85°C and meets a series of environmental test conditions including Altitude, Vibration, Humidity, and Shock.
Absorptive SP8T PIN Diode Switch Operating From 1 Ghz to 8 Ghz Up to +30 dBm and SMA-Female
SKU:
P/N: PSWA-8T-MA0100080S-01
The PSWA-8T-MA0100080S-01 is a Single Pole Eight Throw (SP8T) PIN diode switch with an operating frequency range of 1 GHz to 8 GHz. The 50 ohm absorptive design supports TTL compatible driver circuitry for accurate logic control. Impressive typical performance includes 2.7 dB insertion loss, 80 dB isolation, and < 100 nsec switching speed. The switch requires a dual bias voltage of +5Vdc / -5Vdc and has maximum input power handling of up to +30 dBm. The rugged and compact package supports SMA female RF connectors and solder terminal pins for DC bias voltage and TTL control. The switch is designed for high reliability with a wide operational temperature range of -40°C to +85°C and meets a series of environmental test conditions including Altitude, Vibration, Humidity, and Shock.
Reflective SP3T PIN Diode Switch Operating From 26 Ghz to 40 Ghz Up to +23 dBm and 2.92mm-Female
SKU:
P/N: PSWR-3T-MK2600400S-01
The PSWS-3T-MK2600400S-01 is a Single Pole Three Throw (SP3T) PIN diode switch with an operating frequency range of 26 GHz to 40 GHz. The 50 ohm absorptive design supports TTL compatible driver circuitry for accurate logic control. Impressive typical performance includes 3.0 dB insertion loss, 55 dB isolation, and < 100 nsec switching speed. The switch requires a dual bias voltage of +5Vdc / -5Vdc and has maximum input power handling of up to +23 dBm. The rugged and compact package supports 2.92mm female RF connectors and solder terminal pins for DC bias voltage and TTL control. The switch is designed for high reliability with a wide operational temperature range of -40°C to +85°C and meets a series of environmental test conditions including Altitude, Vibration, Humidity, and Shock.
DPDT Electromechanical Relay Latching Switch, Unterminated DC to 40 GHz, up to 10W, 24V, Positive Common, 2.92mm Female Type
SKU:
P/N:SWSDP-MK40G24V-L3J3-01
The SWSDP-MK40G24V-L3J3-01 is a Double Pole Double Throw (DPDT) electromechanical relay switch that operates across a wide frequency range of DC to 40 GHz and can handle up to 10W of average power in a break before make condition. The design is rated for 2.5 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 1 dB insertion loss and isolation greater than 55 dB. This switch requires +24Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports 2.92mm Type female connectors and 2*5P JTAG for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.
DPDT Electromechanical Relay Latching Switch, Unterminated DC to 40 GHz, up to 10W, 12V,TTL(H), 2.92mm Female Type
SKU:
P/N:SWSDP-MK40G12V-L3D9-01
The SWSDP-MK40G12V-L3D9-01 is a Double Pole Double Throw (DPDT) electromechanical relay switch that operates across a wide frequency range of DC to 40 GHz and can handle up to 10W of average power in a break before make condition. The design is rated for 2.5 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 1 dB insertion loss and isolation greater than 55 dB. This switch requires +12Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports 2.92mm Type female connectors and D Sub 9 for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.
DPDT Electromechanical Relay Latching Switch, Unterminated DC to 26.5 GHz, up to 24W, 24V, Positive Common, 2.92mm Female Type
SKU:
P/N:SWSDP-MK26G24V-L3J3-01
The SWSDP-MK26G24V-L3J3-01 is a Double Pole Double Throw (DPDT) electromechanical relay switch that operates across a wide frequency range of DC to 26.5 GHz and can handle up to 24W of average power in a break before make condition. The design is rated for 2.5 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 0.9 dB insertion loss and isolation greater than 55 dB. This switch requires +24Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports 2.92mm Type female connectors and 2*5P JTAG for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.
DPDT Electromechanical Relay Latching Switch, Unterminated DC to 26.5 GHz, up to 24W, 12V, TTL(H), 2.92mm Female Type
SKU:
P/N:SWSDP -MK26G12V-L3D9-01
The SWSDP -MK26G12V-L3D9-01 is a Double Pole Double Throw (DPDT) electromechanical relay switch that operates across a wide frequency range of DC to 26.5 GHz and can handle up to 24W of average power in a break before make condition. The design is rated for 2.5 million lifecycles and features a Latching Actuator where the selected position remains active with constant voltage, all positions are open when voltage is removed. Impressive typical performance includes 0.9 dB insertion loss and isolation greater than 60 dB. This switch requires +12Vdc bias voltage and operates over a temperature range of -25°C to +65°C. The rugged and compact package assembly supports 2.92mm Type female connectors and D-SUB 9P for DC control. And for highly reliable operation, the model is guaranteed to meet MIL-STD-202 environmental test conditions for shock and random vibration.