Coaxial Cable Assembly
Microwave Test Cable
Coaxial RF Connector
Coaxial RF Adapter
Coaxial RF Termination
Coaxial RF Test Probe
Coaxial RF Attenuator
RF Switch
Coaxial RF Power Dividers1.85mm Connector
1.85mm Female Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.009)
SKU:
P/N:VCJS-FLET-PTLK-98
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.012)
SKU:
P/N:VCJS-FLET-PTLK-98
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Field Replaceable Flange Mount Connector, 4 Hole (Accepts Ø.009)
SKU:
P/N:VCJS-FLET-PTLK-97
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Field Replaceable Flange Mount Connector, 4 Hole (Accepts Ø.012)
SKU:
P/N:VCJS-FLET-PTLK-96
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Male Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.009” )
SKU:
P/N:VCPS-FLET-PTLK-99
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Male Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.012”)
SKU:
P/N:VCPS-FLET-PTLK-98
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Solderless PCB Compression Mount, Removable End Launch
SKU:
P/N:VCJS-NMTT-PEDM-99
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Male Solderless PCB Compression Mount, Removable End Launch
SKU:
P/N:VCPS-NMTT-PEDM-99
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Solderless PCB Top Layer Compression Mount Connector, 2 Hole
SKU:
P/N:VCJS-FLTT-PTLK-98
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Solderless PCB Compression Flange Mount Connector, 2 Hole , 67GHz
SKU:
P/N:VCJS-FLTT-PTLK-99
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.