Coaxial Cable Assembly
Microwave Test Cable
Coaxial RF Connector
Coaxial RF Adapter
Coaxial RF Termination
Coaxial RF Test Probe
Coaxial RF Attenuator
RF Switches
Rotary Joints
RF Circulators
Coaxial RF Power Dividers
RF Couplers
RF FiltersRF Circulators
ZOMWAVE’s RF circulator is a passive three-port microwave device designed to control signal direction and energy flow in RF circuits. Like an isolator, it uses ferrite materials and magnets to guide the incoming signal, helping improve system stability and reduce unwanted interference.
Our 50 Ohm RF circulator is available with SMA and N connectors only, with broadband options from 1 GHz to 26.5 GHz, depending on type and style. Many models offer very low insertion loss, 10 W power handling, a maximum VSWR of 1.45:1, and compliance with RoHS and REACH requirements. Waveguide RF circulators are also part of the product range for customers needing dependable RF performance in demanding applications.
ZOMWAVE is built for custom production, bulk supply, and fast turnaround, with 5 days of shipping shown on the RF Circulators category page. The lineup supports commercial and military radar, microwave systems, antenna projects, and other RF applications, while expert technical support helps customers choose the right solution quickly.
High Power Circulator with 19 dB lsolation from 1350 MHz to 1850 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0135-0185-01
The RC-AMAJJJ-0135-0185-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 1350 to 1850 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 19 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 18 dB lsolation from 1160 MHz to 1610 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0116-0161-01
The RC-AMAJJJ-0116-0161-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 1160 to 1610 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 18 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 20 dB lsolation from 950 MHz to 1250 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0095-0125-01
The RC-AMAJJJ-0095-0125-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 800 to 1000 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 20 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 20 dB lsolation from 800 MHz to 1000 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0080-0100-01
The RC-AMAJJJ-0080-0100-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 800 to 1000 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 20 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 18 dB lsolation from 700 MHz to 900 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0070-0090-01
The RC-AMAJJJ-0070-0090-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 700 to 900 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 18 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 18 dB lsolation from 600 MHz to 800 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0060-0080-01
The RC-AMAJJJ-0060-0080-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 600 to 800 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 18 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 19 dB lsolation from 400 MHz to 470 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0040-0047-01
The RC-AMAJJJ-0040-0047-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 400 to 470 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 19 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 20 dB lsolation from 400 MHz to 430 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0040-0043-01
The RC-AMAJJJ-0040-0043-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 400 to 430 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 20 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 20 dB lsolation from 350 MHz to 380 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0035-0038-01
The RC-AMAJJJ-0035-0038-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 350 to 380 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 20 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 20 dB lsolation from 300 MHz to 320 MHz, 150 Watts and SMA Female
SKU:
P/N: RC-AMAJJJ-0030-0032-01
The RC-AMAJJJ-0030-0032-01 is a high power circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 300 to 320 MHz. This coaxial part uses SMA female connectors on all ports and has a minimum of 20 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems, and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 17 dB lsolation from 1.5 GHz to 3 GHz, 150 Watts and N Type Female
SKU:
P/N: RC-ANCJJJ-0150-0300-01
The RC-ANCJJJ-0150-0300-01 is a circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 1.5 to 3 GHz. This coaxial part uses N Type female connectors on all ports and has a minimum of 17 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems,and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.
High Power Circulator with 17 dB lsolation from 1.5 GHz to 2.5 GHz, 150 Watts and N Type Female
SKU:
P/N: RC-ANCJJJ-0150-0250-01
The RC-ANCJJJ-0150-0250-01 is a circulator offering a forward and reverse power rating of 150 Watts at an operational frequency band of 1.5 to 2.5 GHz. This coaxial part uses N Type female connectors on all ports and has a minimum of 17 dB of isolation.
ZOMWAVE offers a wide array of circulators to meet your specific requirements. These unique devices enable two signals to travel in opposite directions along a single channel. A classic application is at the antenna-transceiver interface: signal flow follows a clockwise path from the antenna (Port 1) to the receiver (Port 2), and then from the transmitter (Port 3) back to the antenna (Port 1). By terminating one port with a matched load, the circulator can also function as an isolator. These components are suitable for radar transmit/receive modules, amplifier systems,and any scenario that requires isolation from signal reflections or bidirectional communication over a shared line.
Our circulators deliver excellent performance with low insertion loss, high isolation, and proven reliability.