Coaxial Cable Assembly
Microwave Test Cable
Coaxial RF Connector
Coaxial RF Adapter
Coaxial RF Termination
Coaxial RF Test Probe
Coaxial RF Attenuator
RF Switches
Rotary Joints
RF Circulators
Coaxial RF Power Dividers
RF Couplers
RF FiltersProducts
1.85mm Female Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.009)
SKU:
P/N:VCJS-FLET-PTLK-98
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.012)
SKU:
P/N:VCJS-FLET-PTLK-98
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Field Replaceable Flange Mount Connector, 4 Hole (Accepts Ø.009)
SKU:
P/N:VCJS-FLET-PTLK-97
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Field Replaceable Flange Mount Connector, 4 Hole (Accepts Ø.012)
SKU:
P/N:VCJS-FLET-PTLK-96
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Male Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.009” )
SKU:
P/N:VCPS-FLET-PTLK-99
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Male Field Replaceable Flange Mount Connector, 2 Hole (Accepts Ø.012”)
SKU:
P/N:VCPS-FLET-PTLK-98
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Solderless PCB Compression Mount, Removable End Launch
SKU:
P/N:VCJS-NMTT-PEDM-99
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Male Solderless PCB Compression Mount, Removable End Launch
SKU:
P/N:VCPS-NMTT-PEDM-99
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Female Solderless PCB Top Layer Compression Mount Connector, 2 Hole
SKU:
P/N:VCJS-FLTT-PTLK-98
The solderless PCB connector design of the 1.85 mm RF connector is built for demanding millimeter wave layouts where you need mode-free performance through 65 GHz, a mostly air dielectric structure, and a support bead set back inside the body to reduce interaction in a mated pair. Its interface is engineered so the outer conductors engage before the center conductors make contact, which helps protect signal integrity in high-frequency test fixtures and compact board launches. The M7 thread is compatible only with the 2.4 mm interface, and adapters are available to mate 1.85 mm to SMA and 2.92 mm connectors, giving you more flexibility when you need to bridge mixed systems, simplify lab integration, and avoid redesigning the full signal path.
1.85mm Female Solderless PCB Compression Flange Mount Connector, 2 Hole , 67GHz
SKU:
P/N:VCJS-FLTT-PTLK-99
The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. Zomwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
1.85mm Male to 1.85mm Male Phase Matched Armor Test Cable, Low Loss Phase-Stable
ZOMWAVE Phase Matched Microwave Test Cables are designed for test applications that request accurate, repeatable measurements. ZOMWAVE Phase Matched Microwave Test Cables provide excellent mechanical durability and electrical performance for frequency up to 110GHz. These Microwave Test Cables feature a rugged construction that deliver a 10 Million flex cycle life, with high phase and amplitude stability. Phase Matched Cable in sets of two, with a delay less than ±2ps. ZOMWAVE 1.85mm Male to 1.85mm Male Phase Matched Armor Test Cable, Low Loss Phase-Stable are using a Stainless Steel with passivated connectors that are durable for the test applicaton. ZOMWAVE 1.85mm Male to 1.85mm Male Phase Matched Armor Test Cable, Low Loss Phase-Stable are available in 24, 36, 48 and 60 inch. No only the lengths but also the phase or time delay matching can be customized per customer's requirement.
2.4mm Male to 2.4mm Male Phase Matched Armor Test Cable, Low Loss Phase-Stable
SKU:
P/N:P2PSP2PS-K33P-24.00IN(1pc)
ZOMWAVE Phase Matched Microwave Test Cables are designed for test applications that request accurate, repeatable measurements. ZOMWAVE Phase Matched Microwave Test Cables provide excellent mechanical durability and electrical performance for frequency up to 110GHz. These Microwave Test Cables feature a rugged construction that deliver a 10 Million flex cycle life, with high phase and amplitude stability. Phase Matched Cable in sets of two, with a delay less than ±2ps. ZOMWAVE 2.4mm Male to 2.4mm Male Phase Matched Armor Test Cable, Low Loss Phase-Stable are using a Stainless Steel with passivated connectors that are durable for the test applicaton. ZOMWAVE 2.4mm Male to 2.4mm Male Phase Matched Armor Test Cable, Low Loss Phase-Stable are available in 24, 36, 48 and 60 inch. No only the lengths but also the phase or time delay matching can be customized per customer's requirement.